end cap separation on a GSR

[mswiat]

Anyway, anyone experience this? Should I let the cap slip out all the way, or smack it back in as I go? It's probably got around 300-400 swings. Picked it up on the board last year with half that many swings. I let some friends swing it in BP one day and noticed the separation when I took some swings.

If I glue it back in, it's 3M marine adhesive, correct?

It's been a few months since I've been on the boards! Hope everyone has been well, our season starts tomorrow.

 

[bat monger]

How bad is it? Post up some pics.

 

[mswiat]

I smacked it back in. It was out a quarter of an inch or so. I'm going to take some bp this week and swing it. It's not quite game ready yet. I'll see if it happens again or if it was a fluke.

 

[bat monger]

I smacked it back in. It was out a quarter of an inch or so. I'm going to take some bp this week and swing it. It's not quite game ready yet. I'll see if it happens again or if it was a fluke.

I've noticed it's always my friends that knock out my endcaps.

 

[mswiat]

I hardly had a chance to swing it last year before it was too cold.

It's just starting to open up.

 

[philphan89]

the same thing is happening with my combatant i have to get some 3m soon

 

[Hebrew Hacker]

Let it come all the way out, then 3M it.

 

[KannonsDad]

I wouldn't slam it back in anymore, the end of the barrell will start to flare out and you'll be Munsoned

 

[mswiat]

Good to know, thanks!

 

[LSU_MJL]

Let it come all the way out, then 3M it.

this has always worked best for me. if it comes out once, chances are it will come out again.